Service manual

4-12
c) Disconnect the wires from the main L1
filter board as follows:
White at P31 (to 3-pin plug)
Black at P32
Brown at P33
White at P34
d) Remove the mounting screw and re-
m
ove the board from the bracket.
6. To remove the main L2 filter:
a) IMPORTANT: Discharge the main L2
filter by touching the leads of a 20,000
ohm resistor to the terminals and chas-
s
is ground.
b) Remove the nut and washer from the
main L2 filter stud and remove the filter.
c) Disconnect the wires from the main L2
filter terminals.
7. To remove the grill thermostat:
a) IMPORTANT: Discharge the main L2
filter by touching the leads of a 20,000
ohm resistor to the terminals and chas-
s
is ground.
b) Remove the main L2 filter and move it
out of the way of the thermostat (see
step 6 for the procedure).
c) Disconnect the wires from the thermo-
s
tat terminals.
d) Remove the two screws from the ther-
m
ostat and remove the thermostat.
Screw
P32 BK
P33 BR
P31 WH
P34 WH
Main L1 Filter
Main L2 Filter Nut & Washer
2
4
3
1
GN/YL (GND)
RD (PLUG)
WH (PLUG)
RD (RELA
Y)
BK (THERMOSTAT
)
Grill Thermostat
BK Wires
Screw (1 of 2)
Main L2 Filter