Service manual

4-14
7. To remove the inverter:
a) Remove the two top screws from the
outer convection cover at the rear of
the oven.
c) Remove the magnetron fan motor hous-
i
ng assembly and set it on top of the
oven.
d) Disconnect the two black wires from
the magnetron fan motor terminals.
e) Remove the three screws from the mag-
n
etron fan motor housing and separate
the sections.
g) Pull the blower off the magnetron fan
motor shaft.
Magnetron Fan Motor Wires
f) Remove the magnetron fan motor
screws from the housing and remove
the motor from the housing.
Mag. Fan Motor
Housing Screws
Mag. Fan Motor Screws
Magnetron Fan Blower
Motor Shaft
Outer Convect. Cover
(2 Top Screws)
b) Remove the two inverter housing screws
from the rear of the oven.
Inverter Housing Screws