Service manual

4-30
REMOVING THE BROIL ELEMENT AND
THE OVEN TEMPERATURE SENSOR
WARNING
1. Unplug oven or disconnect power.
2. Open the lower oven door.
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
Broil Element Temperature Sensor
3. To remove the broil element:
a) Remove the four screws from the front
and rear brackets (see the top right
photo).
b) Pull the broil element forward until you
can access the wire terminals.
c) Disconnect the orange and blue wire
connectors from the broil element ter-
m
inals and remove the element.
Broil Element Screws
Broil Element Wires
OR BU OR BU
Broil Element