Instruction for Use

5
3. HOW TO USE THE APPLIANCE
HOW TO LOAD THE RACKS
UPPER RACK
- depending on model
Long-handled utensils (kitchen knives) must be arranged with the sharp end
facing in towards the appliance.
The two handles
D
must be on same level.
Washing without the upper rack
If the appliance is equipped with the adjustable retainers shown in the figure the upper rack can
be removed to wash large plates and trays, etc. Open the two retainers
E
and remove the rack
from the guides.
When the upper rack is in place the retainers must always be closed.
LOWER RACK
- depending on model
Sharp utensils that might cause injury must be placed in the cutlery basket with the sharp end facing
downwards. Arrange crockery so that water does not collect in cavities, ensuring that the spray arms turn
freely. Only use dishwasher-proof crockery and dishes. Do not use the dishwasher for washing wooden items,
aluminium, tin, silver cutlery or decorated crockery (unglazed).
WASH CYCLE
The appliance door must be closed and the water tap open.
To add dishes, open the door with caution:
Beware of hot steam.
Close the door.
The programme resumes from where it was interrupted.
The wash cycle can be interrupted at any time by
pressing RESET.
PROGRAMME END
Exercise caution when opening the door: beware of
hot steam
.
Only press the
OFF
button once the START indicator lamp has switched off. All the indicator lamps switch off. Unload the
appliance, starting from the lower rack in order to avoid any residual drips of water falling onto crockery below.
For even better drying results, leave the dishwasher door open a little before unloading in order to allow the
steam to dissipate, helping the dishes to dry. The underside of the kitchen worktop must be protected (see
instructions in “Maintenance and Installation”).
Dish holder
A
In horizontal position for cups and long utensils.
In raised position for plates and stemware.
Glass holder
B
Depending on the position, for small glasses or stemware.
A
B
Cutlery basket
C
It can be placed on the upper rack when the “Half load/Multizone”
function is selected.
Rack vertical height
adjustment
D
The top rack height can be adjusted even when loaded.
Lower adjustment: pull the two handles
D
outwards and lower the
rack.
Upper adjustment: pull the two handles
D
up until the rack fits in
place (standard position).
D
C D
E
Retainer
open
E
Retainer
closed
Plate holder
F
Partially folding for maximum rack loading
flexibility.
Zone
G
Intensive wash with additional
“Power
Clean”
function selected.
Cutlery basket
H
The grill element
I
supplied can be inserted to
keep cutlery separate.
I
H
G
F
Changing the programme in progress/
Resetting
- Keep the START button pressed for about 2 seconds
until the START indicator lamp switches off.
- (Water drains for up to 60 seconds).
- The appliance is now ready to be restarted.
Fitted models
- Press the START/RESET button (for 2 seconds).
- Close the door.
- (Water drains for up to 60 seconds).
- The appliance is now ready to be restarted.