Specifications

2. Remove three screws that secure the module
to the head.
3. Separate the module from the head
4. Remove two screws on the bottom of the ice
maker head and separate the head from the
mold. The Thermostat can be removed at
this point.
5. When replacing the thermostat apply a
coating of Alumilastic to the mold . This will
provide a thermal bond between the mold
and thermostat.
Separating IM Head From the Mold
Disassembling the Ice Maker –Module Removal
2
3
4
5
Freezer Components – cont.
41