Specifications

Removing Auger Motor
6. Remove four ¼” screws securing the
motor to the housing .
7. Lift up the auger motor and disconnect the
wire harness.
Auger Motor
Compartment
Drain Outlet
Auger Motor
Auger Motor Compartment
Drain Hole
Condensate Drain
Under normal operating conditions, moisture may accumulate in the bottom of
the auger motor housing. A drain hole is provided to allow water to pass through
the inner door panel and drop onto the lower shelf, see figure 2.
Figure 1
Figure 2
6
7
Freezer Components – cont.
43