Specifications

Adjusting Temperature Set Points:
Pressing and holding TEMPERATURE starts a 3,2,1 second countdown.
During the countdown using the dispenser cancels the countdown and
no dispensing is permitted. The number „3‟ blinks 3 times and an „invalid‟
tone sounds 3 times,. The user has to release both the pad and the
button and press the button again to start the countdown over. During
the countdown, pressing any other button or releasing the pad cancels
the countdown and the „3‟ blinks 3 times and the „invalid‟ tone sounds 3
times. The user has to start over.
Please note: the blinking and toning is synchronized so that the moment
the number „3‟ blinks, the tone is sounded. After 3 seconds, the
TEMPERATURE shows up with the CURRENT refrigerator setting.
See figure 7.
Pressing TEMPERATURE changes between the refrigerator and freezer
compartments and displays the current setting.
Pressing the ICE MODE pad or after 60 seconds of no activity, the
display will revert back to the normal screen.
ICE MODE LIGHT MAX ICE LOCK
Hold 3 Sec.
TEMPERATURE
Hold 3 Sec.
RESET FILTER
Hold 3 Sec.
Back Units Select Zone
-
+
Refrigerator
Recommended Setting
Figure 7
50