Specifications

ICE MODE LIGHT
MAX ICE
LOCK
Hold 3 Sec.
TEMPERATURE
Hold 3 Sec.
RESET FILTER
Hold 3 Sec.
Back Units Select Zone
-
+
Refrigerator
Recommended Setting
Confirm
Lower
Raise
Adjusting Temperature Settings
Press the LOCK pad to raise the temperature set point or press the
MAX ICE pad to lower the temperature set point. See figure 8.
Important: When the temperature is changed, the word “ CONFIRM”
above the filter reset pad illuminates and will FLASH without an audible
tone constantly until user presses RESET FILTER, ICE MODE or after
60 seconds of inactivity. If the user presses TEMPERATURE to change
compartments, CONFIRM still flashes if one of the temps has been
changed.
NOTE: To view Celsius temperatures, press the LIGHT button when
adjust mode is activated. To return the display setting to Fahrenheit,
press LIGHT again
.
.
Figure 8
Freezer Temperature Setting
After viewing (and adjusting if desired) the refrigerator set point, press
TEMPERATURE to change the display to show the freezer set point.
When the zone has been changed, “FREEZER” appears on the display
screen. Press LOCK to raise the set point, or press MAX ICE to lower
the set point. When you have finished viewing (and adjusting if desired)
both the refrigerator and freezer set points, press FILTER to save the
settings. See figure 9.
Figure 9
ICE MODE LIGHT
MAX ICE
LOCK
Hold 3 Sec.
TEMPERATURE
Hold 3 Sec.
RESET FILTER
Hold 3 Sec.
Back Units Select Zone
-
+
Freezer
Recommended Setting
Confirm
Lower
Raise
Save
51