Installation manual
- 11 -
Checking before Use
The oven should be checked before you start using it.
On the outside
• Check that the oven has not been damaged in transit (dents, scratches, etc.)
• Check/adjust the height and check that the oven is placed level (horizontally)
• Check/adjust oven door
• Connections
• Check for correct water connection
• Turn on water supply
• Check for leaks
• Turn off water supply
• Check and clean dirt filter
• Turn on water supply again
• Check hand shower
• Check for correct electrical connection
• Check connection to drip tray
• Check for correct mounting of drip tray
• Check for correct fall of hose from drip tray, and check for leaks
• Check for correct exhaust and drain connection
• Clean oven
• Apply steel oil
• Oven chamber
• Check that filter housing is mounted correctly
• Check interior light
• Clean oven
• Operation panel
• Check and adjust, if necessary, each of the preset values
• Heat up the oven at 250°C for approx. 5 min.
The installation checklist and the instruction checklist (appendices 1 and 2) should
be filled in and returned to WHIRLPOOL 30 days after the installation, at the latest.