Installation manual

- 15 -
Oven set-up
 To enter set-up mode, press hot-air key and steaming/preheating key for 2 sec.
 To leave set-up mode, turn switch to the left. Change between set-up and test mode by
pressing combi-steam key.
 The set-up mode is only intended for service engineers who wish to change the set-up
of the computer control of the oven model in question.
 The program display shows a description of the "U" function in question.
Display shows
setting
Not active
Display shows "U"
No.
Display shows
description of "U"
function
Display shows
setting
Press HOT AIR and
STEAMING for 2 sec.
Possible to change to
"d" test mode with
combi steam key
Press STEAMING/
PREHEATING and
HOT AIR for 2 sec.
Not active
Not active
Confirmation of
special settings
Main switch
Not active
Select "U" settings
with turn switch