Installation manual

- 28 -
User Menu B22-B24
B22 Screen saver
In this function, you set the time that should pass until the clock appears in the display. Press
step key to select time.
0= no screen saver
1= 10 sec.
2= 30 sec.
3= 60 sec.
4= 180 sec.
5= 600 sec.
The screen saver appears when the oven has been idle for a particular period of time.
B23 Language
In this function, you change the language of the computer.
Press step key and select 1 to 9. There are two language variants: A – B (see below).
A B
1 DANISH ENGLISH
2 ENGLISH CROATIAN
3 SWEDISH SLOVENE
4 FINNISH ESTONIAN
5 GERMAN HUNGARIAN
6 SPANISH RUSSIAN
7 FRENCH CZECH
8 ITALIAN -
9 DUTCH -
To change the language, you need to update again (see B24).
B24 Software update
In this function, you update the computer software by means of a special memory key (not a
USB key).
1. Insert memory key.
2. Press alarm key to view software version and language variants.
3. Press step key to select language variant.
4. Press alarm key again to start updating process.
The software version of the oven in question is also shown in the start-up sequence when the
oven is switched on.