Installation manual

- 5 -
Installation and Connection
Unpacking the oven
The oven is best handled while still in its wrapping. Wherever possible, use a lifting trolley.
Introduce the lifting trolley under the lower cross tube of the stand and place a couple of
wooden blocks between the cross tube and the lifting trolley.
To achieve the best possible balance, introduce the lifting trolley from the front of the oven or
from the motor side. Note that the oven can be lifted off the stand.
Remove the original packaging from the oven. Do not remove the foil that covers the surfaces
until the oven has been installed, as once the foil has been removed the surfaces are
vulnerable to sharp objects such as tools.
Remove all packaging material that secures the racks in the oven chamber.
The packaging should be destroyed in accordance with national rules and
regulations governing waste disposal. Information on the composition of the
packaging material can be obtained from the WHIRLPOOL Customer Centre.