Service manual

23
Check that you have all
. of your tools
24
Turn on the water
.
faucets and check for
leak; TIghten the couphngs If there
IS leaking
25
Replace the access
n panel Be sure to
tlgh-en the three PhillIps-head
sue&s at the top of the access
panel. Replace the bumper under
the :enter screw.
26
Read the Use and Core
. -to fully
understand your new washer/dryer
Plug electrical cord Into grounded
outle?t Now start the washer and
allo~v It to complete the regular
cyc e
27
Open the dryer door
I
Check to be sure the
ht ‘teen 15 in Its proper position
Wipe out the drum
28
Start the dryer and
.
allow It to complete a
cycle to make sure It IS working
prop erly
29
Finally. save all
n literature and keep it
If washer/dryer does not
operate properly...
Check the foIlowIng to be sure that
I Electric supply IS connected
2 House fuse or circuit breaker 1s
Intact and light
3 Washer IId or dryer door IS closed
4 Controls are set In a runntng or
“ON’ position
j Dryer start button has been firmly
pushed
6 Make sure yellow shippIng strap
has been completely removed
During normal business hours the
Wh~rloool COOL-LINE” Service WIII
answer any questtons about
operating or malntainlng you,
washer/dryer not covered In you!
Ooerailna Instructions The
Whirlpool-COOL-LINE* SewIce
number IS [phone]
Dial just
as you normally dial long distance -
the call is free
with tne washer/dryer
Panel E