EN English, 8 PHVS 8.
English GENERAL SAFETY EN Before any cleaning or maintenance operation, disconnect hood from the mains by removing the plug or disconnecting the mains electrical supply. Always wear work gloves for all installation and maintenance operations.
ELECTRICAL CONNECTION The mains power supply must correspond to the rating indicated on the plate situated inside the hood. If provided with a plug connect the hood to a socket in compliance with current regulations and positioned in an accessible area, after installation.
CONTROLS The hood is fitted with a control panel with aspiration speed selection control and a light switch to control cooking area lights. To select hood functions, simply touch the controls: T1. Button ON/OFF suction motor T2. Button to select medium suction speed (power) T3. Button to select high and intensive suction speed (power) Press once to select high suction speed (power) (LED L3 on); Press again to select intensive suction speed (power) (LED L3 flashing).
MAINTENANCE Cleaning Clean using ONLY the cloth dampened with neutral liquid detergent. DO NOT CLEAN WITH TOOLS OR INSTRUMENTS. Do not use abrasive products. DO NOT USE ALCOHOL! Perimeter aspiration panel Clean the perimeter aspiration panel with the same frequency as the ant-fats filter, using a cloth and not too concentrated liquid detergent. Do not use abrasive substances. Replacing lamps Disconnect the appliance from the electricity.
LIB0117128 02/2016 DISPOSAL This appliance is marked according to the European directive 2012/19/EC on Waste Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
