Installation guide

• Allopeningsinthewallorfloorwherecooktopistobe
installedmustbesealed.
• Cabinetopeningdimensionsthatareshownmustbeused.
Givendimensionsareminimumclearances.
• Groundedelectricalsupplyisrequired.See"Electrical
Requirements"section.Propergassupplyconnectionmust
beavailable.See"GasSupplyRequirements"section.
• Thecooktopisdesignedtohangfromthecountertopbyits
sideorrearflanges.
• Thegasandelectricsupplyshouldbelocatedasshownin
"InstallationClearances"sectionsothattheyareaccessible
withoutrequiringremovalofthecooktop.
• Providecutoutinrightrearcornerofcutoutenclosureas
showntoprovideclearanceforgasinlet,powersupplycord,
andtoallowtheratinglabeltobevisible.
IMPORTANT:Toavoiddamage,checkwithyourbuilderor
cabinetsuppliertomakesurethatthematerialsusedwillnot
discolor,delaminateorsustainotherdamage.
Mobile Home - Additional Installation Requirements
The installation of this cooktop must conform to the
Manufactured Home Construction and Safety Standard, Title 24
CFR, Part 3280 (formerly the Federal Standard for Mobile Home
Construction and Safety, Title 24, HUD Part 280). When such
standard is not applicable, use the Standard for Manufactured
Home Installations, ANSI A225.1/NFPA 501A or with local codes.
In Canada, the installation of this cooktop must conform with the
current standards CAN/CSA-A240-1atest edition, or with local
codes.
Product Dimensions
Metal Cooktops
Curved-edge glass cooktops
y........................B.....................
A. 21_" (53.7 cm)
B. 30_6" (77.0 cm) on 30" (76.2 cm) models,
36_J' (92.3 cm) on 36" (91.4 cm) models
C. 2z_'' (7.3 cm)
Installation Clearances
I_-_ A I
M
A. 21_" (53.4 cm)
B. 31 z_6"(79.8 cm) on 30" (76.2 cm) models,
37_G" (95.4 cm) on 36" (91.4 cm) models
C. 2 _" (7.3 cm)
Straight-edge glass cooktops
A
C
A. 20_G" (51.5 cm)
B. 30_6" (76.8 cm) on 30" (76.2 cm) models,
36_6" (92.5 cm) on 36" (91.4 cm) models
C. 2 _" (7.3 cm)
A. 30" (76.2 cm) on 30" models," 36" (91.4 cm) on 36" models
B. Combustible area above countertop (shown by dashed box
above)
C. 30" (76.2 cm) minimum clearance between top of coektop
platform and bottom of unprotected wood or metal cabinet
(24" [61 cm] minimum clearance if bottom of wood or metal
cabinet is protected by not less than V4" [0.6 cm] flame
retardant mlllboard covered with not less than No. 28
MSG sheet steel, 0.015" [0.04 cm] stainless steel, or
0.024 [0.06 cm] aluminum or 0.020 [0.05 cm] copper)
D. 13" (33 cm) recommended upper cabinet depth
E. 2_" (5.4cm)
F 19" (48.3 cm)
G. 18" (45.7 cm) minimum clearance from upper cabinet to
countertop within minimum horizontal clearances to cooktop
H. Grounded outlet - Locate within 24" (61 cm) of right rear
corner of cutout
L 29" (73.7 cm) on 30" models; 35_/4'' (89.5 cm) on 36" models
J. 8_" (21.3 cm) minimum distance to nearest left and right side
combustible surface
K. 2_" (7.3 cm) minimum distance to rear combustible surface
L. Gas line opening - Wall: anywhere 5" (12.7 cm) below
underside of countertop. Cabinet floor: anywhere within
6" (!5.2 cm) of rear wall is recommended
M. 24" (61 cm) minimum countertop depth is required
NOTES: After making the countertop cutout, some installations
may require notching down the base cabinet side walls to clear
the cooktop base. To avoid this modification, use a base cabinet
with sidewalls wider than the cutout.