Installation Instruction

4
INSTALLATION REQUIREMENTS
TOOLS AND PARTS
Gather the recommended tools and parts before starting
installation. Read and follow the instructions provided with
thetools listed here.
All Installations
Tools Needed:
Pliers Flat-blade screwdriver
Phillips screwdriver Utility knife
Nipper Small level
Measuring tape or ruler Hex L-wrenches
10" adjustable wrench that
opens to 1
1
/
8
" (29 mm)
Torx
®†
T20
®
screwdriver
†
®
TORX, T15, and T20 are registred trademarks of Acument Intellectual Properties, LLC.
Other Useful Items You May Need:
Flashlight Shallow pan
Bath towel Masking, electrical,
or duct tape
Parts Supplied:
Provided with the dishwasher. Check when you unbox the
dishwasher.
Kick plate Moisture barrier strip
Cable tie
(for drain hose)
Undercounter mounting
brackets (2)
Adjustment cap (2) ST4 x 14(2)
(for installation bracket)
ST3.9 x 9(2)
(for installation bracket)
ST3.9 x 13(2) (for kick plate)
Make sure all parts are included in the literature package.
If parts are not included, call us at our toll-free number or visit
our website listed in the User Guide.