Installation Instruction

5
7. Install brackets
Fasten the brackets as shown, one on each side, with the
screws provided.
NOTE: Fasten the brackets to the washer before fastening
to the dryer. This ensures the brackets align correctly with
the holes in the dryer.
IMPORTANT: When moving the stacked washer/dryer into
its nal location, hold onto both the washer and the dryer
to ensure the brackets remain secure.
5. Stand dryer up and slide to front
of washer
Lift the dryer back to an upright position, keeping it on the
covering. Use the covering to slide the dryer to the front of
the washer to avoid damaging the rubber feet.
6. Place dryer on washer
Lift the dryer up and set it securely on top of the washer.
Position the dryer so the front and sides are ush with those
of the washer. The rear of the dryer will overhang the rear
of the washer.
Rear of dryer and washer
Rear of dryer and
washer
Rear of dryer and washer
Fasten
to
washer
rst.
Fasten
to
washer
rst.
Fasten
to dryer
last.
Fasten
to dryer
last.