Owner's Manual & Installation Guide

2
STACK KIT SAFETYSTACK KIT SAFETY
Table of Contents
STACK KIT SAFETY ............................ 2
INSTALLATION REQUIREMENTS ..... 2
Tools and Parts ............................. 2
Location Requirements ................. 3
Uninstall Washer and Dryer .......... 3
If Your Washer or Dryer
is Still in Its Packaging .................. 3
INSTALLATION INSTRUCTIONS ....... 4
Table des matières
SÉCURITÉ DE L’ENSEMBLE
DE SUPERPOSITION .......................... 6
EXIGENCES D’INSTALLATION .......... 6
Outils et pièces ............................. 6
Exigences d’emplacement ........... 7
Désinstallation –
laveuse et sécheuse ..................... 7
Si la laveuse ou sécheuse est
encore dans son emballage .......... 7
INSTRUCTIONS D’INSTALLATION .... 8
INSTALLATION REQUIREMENTS
TOOLS AND PARTS
Gather the required tools and parts before starting installation.
Tools needed:
Phillips screwdriver Adjustable wrench that
opens to 1" (25 mm)
Level
Pliers or slip-joint pliers
(for drain and inlet hoses)
Bucket
Tape measure
TORX
®
T20
®†
security
screwdriver
†TORX and T20 are registered trademarks of Acument Intellectual Properties, LLC.