Instruction for Use
9
BEFORE USING THE WARMING DRAWER
To open and close the drawer, push the middle
of the panel as shown in the gure.
At rst use, clean the appliance as follows:
- clean the surface with a damp cloth and then
dry.
- Preheat the empty drawer for at least two
hours: turn the temperature knob to maximum
in order to eliminate any residuals of fat, oil or manufacturing resins that can create
unpleasant odors during the warming of dishes. Air the room.
- After completing these operations, the appliance is ready for rst use.
• Before use, remove:
- stickers placed on the front and door of the warming drawer, except the rating plate;
- keep children away from the product and the packing materials, to avoid interaction
with them, if not properly supervised;
- any stickers from accessories when present.
INSTALLATION
Safety instructions for tting the warming drawer
IMPORTANT: The drawer must be immediately xed to the cabinet, following the
instructions given below. The coupled appliance cannot be installed before xing
the drawer to the cabinet.
Fix the drawer as shown in the gure.
Before electrically connecting the
appliance, make sure the rating plate
data matches the mains power supply,
otherwise the appliance could become
damaged.
Make sure the connection to the power supply is easily accessible after the appliance
has been tted.
The warming drawer can only be tted in combination with other appliances with
maximum weight of 60 kg and provided with adequate cooling ventilation.
To install the appliance that can be combined with the dish warmer, follow the
instructions given in the relevant use and installation handbook.
Important: The same brand coee maker or combi microwave oven, sized as shown
on the following page, can be installed above the warming drawer. For installation,
carefully follow the directions given in the instruction handbooks supplied with the
coee maker and the combi microwave oven.