Installation Guide

3
Parts Supplied
Check that all parts are included. See separate parts list for
accessories available for your dishwasher.
Location Requirements
IMPORTANT: Observe all governing codes and ordinances.
Failure to meet codes and ordinances could lead to fire or
electrical shock.
Proper installation is your responsibility.
■
Contact a qualified installer to ensure that the dishwasher is
installed to meet all electrical and plumbing national and local
codes and ordinances.
■
Install the dishwasher as specified in these instructions.
■
Have everything you need to properly install dishwasher.
■
Protect dishwasher and water lines leading to dishwasher
against freezing. Damage from freezing is not covered by the
warranty.
■
This dishwasher is manufactured for indoor use only.
■
In
stall and level dishwasher on a floor that will hold the weight,
and in an area suitable for its size and use.
■
Install dishwasher in a location with easy access to water,
electricity and drain.
Minimum Clearances
NOTES:
■
Corner locations require 2" (5.1 cm) minimum clearance
between the side of the dishwasher door and the wall or
cabinet.
■
A minimum of 25⁵⁄₈" (65.1 cm) is required in front of the
dishwasher to allow the door to open fully.
■
Opening should be square, and the floor should be level.
Product Dimensions
Side View
*
* To front of door frame
Rear View
A. #8 x ⁵⁄₈ " Phillips flat-head wood screws
B. Phillips color-matched toekick screws
A. 2" (5.1 cm) minimum clearance
for door opening
B. Dishwasher
C. Countertop
D. 25
⁵⁄₈ " (65.1 cm) minimum
AB
A
B
C
D
24" (61 cm)*
16 5/8"(42.2 cm)
32¹⁄₂" to 34¹⁄₂"
(82.6 to 87.6 cm)
23 5/9"(59.8cm)
■
Fully enclosed on both sides, back, and top.
2 ¹⁄₂" (6.2 cm)