Control Guide

5
When the start time is reached the Bake, On and Cook Time
indicator lights will automatically turn on. When the set cook time
ends, the oven will shut off automatically and the indicator lights
will turn off, indicating the end of the cycle.
Pressing the Cancel keypad at any time returns the oven to the
normal cooking mode (not Sabbath Mode compliant).
Positioning Racks and Bakeware
Use the following illustration and chart as a guide for positioning
racks.
Food Rack Position
Extra-large items 6
Roasting large and small cuts of meat and
poultry
1
Pies, casseroles, yeast bread, quick breads,
frozen convenience foods, and 2-rack
baking
2
Most baked goods on a cookie sheet, jelly
roll pan, or in muffin pans; casseroles;
frozen convenience foods
3
Use for broiling and toasting. 4
2-rack baking 5
Bakeware
To cook food evenly, hot air must be able to circulate. Allow 2" (5
cm) of space around bakeware and oven walls. Make sure that no
bakeware piece is directly over another.
Multiple Rack Cooking
Two-rack: Use rack positions 2 and 5.
Baking and Roasting
ACCUBAKE
®
Temperature Management System
The ACCUBAKE
®
system electronically regulates the oven heat
levels during preheat and bake to maintain a precise temperature
range for optimal cooking results. The bake and broil elements or
burners cycle on and off in intervals. On convection range models,
the fan may be cycled on and off for short intervals to provide the
best results.
Before baking and roasting, position racks according to
“Positioning Racks and Bakeware” section. When roasting, it is
not necessary to wait for the oven preheat cycle to end before
putting food in unless it is recommended in the recipe.
Preheating
When START is pressed, the oven will begin preheating. Once
100°F (38°C) is reached, the display temperature will increase as
the actual temperature of the oven increases. When the preheat
temperature is reached, a tone will sound, and the selected
temperature will appear on the display. The time necessary to
preheat the oven to 350°F (177°C) is approximately 10 to 15
minutes (on some models). Factors that have an impact on
preheat times are: room temperature, starting oven temperature,
and the number of oven racks. Unused oven racks can be
removed prior to preheating your oven to reduce the preheat
times.
Broiling
When broiling, preheat the oven for 5 minutes before putting food
in unless recommended otherwise in the recipe. Position food on
grid in a broiler pan, then place it in the center of the oven rack.
IMPORTANT: Close the door to ensure proper broiling
temperature.
Changing the temperature when Custom Broiling allows more
precise control when cooking. The lower the broil setting, the
slower the cooking. Thicker cuts and unevenly shaped pieces of
meat, fish and poultry may cook better at lower broil settings. Use
racks 4 or 5 for broiling. Refer to the “Positioning Racks and
Bakeware” section for more information.
� For best results, use a broiler pan and grid. It is designed to
drain juices and help avoid spatter and smoke.
If you would like to purchase a broiler pan, one may be
ordered. Please refer to the Quick Start Guide for contact
information.
NOTE: Odors and smoke are normal the first few times the oven
is used or if the oven is heavily soiled.
Cook Time
To Set a Timed Cook:
1. Press BAKE. The bake indicator light will light up.
2. Press the TEMP/TIME “up” or “down” arrow pads to enter a
temperature other than the one displayed.
3. Press COOK TIME. The cook time oven indicator light will
light up.
4. Press the TEMP/TIME “up” or “down” arrow pads to enter the
length of time to cook.
5. Press START. The display will count down the time. When the
time ends, the oven will shut off automatically and “End” will
appear on the display.
6. Press CANCEL to clear the display.
To Set a Delayed Timed Cook:
Before setting, make sure the clock is set to the correct time of
day. See “Clock” keypad feature in the “Feature Guide” section.
1. Press BAKE.
2. Press the TEMP/TIME “up” or “down” arrow pads to enter a
temperature other than the one displayed.
3. Press COOK TIME. The cook time oven indicator light will
light up.
4. Press TEMP/TIME “up” or “down” arrow pads to enter the
length of time to cook.
5. Press START TIME. The start time/delay oven indicator light
will light up.
6. Press TEMP/TIME “up” or “down” arrow pads to enter the time
of day to start.
7. Press START.
When the start time is reached, the oven will automatically
turn on. The temperature and/or time settings can be changed
anytime after pressing Start by repeating steps 1-7. When the
set cook time ends, the oven will shut off automatically and
“End” will appear on the display.
8. Press CANCEL to clear the display.