Instructions / Assembly

ManualsBrandsWhirlpool ManualsKitchenUltraEase Dual Stage Replacement Filters

201-8402712 (Rev. 04 1/31/17)

Manufactured and warranted by

Ecodyne Water Systems

1890 Woodlane Drive

Woodbury, MN 55125

How to install, operate

and maintain your

Dual Stage

Water Filtration System

Model WHADUS5

Installation and Operation Manual

System tested and certified by NSF International

against NSF/ANSI Standard 42 for the reduction

of chlorine taste and odor, and Standard 53 for

the reduction of cysts, lead, MTBE and VOCs.

Do not return unit to store

If you have any questions or concerns when

installing, operating or maintaining your water

filtration system, call our toll free number:

1-866-986-3223

Monday- Friday, 7 AM - 6 PM CST or visit

whirlpoolwatersolutions.com

When you call, please be prepared to provide

the model number and date code of your

product, found on the rating decal on back.

Summary of content (12 pages)

PAGE 1
Model WHADUS5 How to install, operate and maintain your Dual Stage Water Filtration System Do not return unit to store If you have any questions or concerns when installing, operating or maintaining your water filtration system, call our toll free number: 1-866-986-3223 Monday- Friday, 7 AM - 6 PM CST or visit whirlpoolwatersolutions.com When you call, please be prepared to provide the model number and date code of your product, found on the rating decal on back.
PAGE 2
TABLE OF CONTENTS Page Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Performance Claims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 Before You Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 3
Specifications & Performance Claims SPECIFICATIONS Supply Water Pressure Min. - Max. Supply Water Temperature Min. - Max. Rated Service Flow Filter Service Life 30 - 100 psi (207 - 689 kPa) 40 - 100 °F (4 - 38 °C) 0.5 gallons per minute (1.89 liters per minute) 270 gallons (1,022 liters) Inlet - Outlet 3/8" quick connect fittings This system conforms to NSF/ANSI 42 and 53 for the specific performance claims as verified and substantiated by test data.
PAGE 4
Performance Claims (continued) ORGANIC CHEMICALS REDUCED BY CHLOROFORM SURROGATE TESTING Contaminant Alachlor Averagej Maximum EPA Percent Influent Effluent MCLp Removal (µg/L)k (µg/L)k (µg/L)k 50 1.0l >98 2.0 1.0l 99 5.0 Atrazine 100 3.0l Carbofuran 190 1.0l >99 Chlorobenzene 77 1.
PAGE 5
Before You Start q Read all steps and guides carefully before installing and using your water filtration system. Follow all steps exactly to correctly install. Reading this manual will also help you to get all the benefits from the water filtration system. q Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. This system is certified for cyst reduction and may be used on disinfected waters that may contain filterable cysts.
PAGE 6
Parts of the System = Filter system assembly = Water supply fitting = Filtered water faucet for sink or countertop mounting = Color coded 3/8" tubing to make all needed connections = Filter change drip tray Materials and Tools Needed NOTE: Gather the required tools before starting installation. Read and follow the instructions provided with any tools listed here.
PAGE 7
Installation Instructions Step A - Install Cold Water Supply Fitting Check and comply with local plumbing codes as you plan, then install a cold water supply fitting. The fitting must provide a leak-tight connection to the water filter 3/8" tubing. A typical connection using the included water supply fitting is shown in Figure 3A. An optional connection using standard plumbing fittings (not included) is shown in Figure 3B. Included Water Supply Fitting 1.
PAGE 8
Installation Instructions Step C - Install Faucet 1. Insert one end of the 3/8" blue tubing into the push-in fitting on the bottom of the faucet. Push tubing through the collet and all the way into fitting. Full engagement is 3/4" length of tube into the fitting. 2. Feed the 3/8" tubing that is attached to the faucet through the mounting hole. Slide the toggle bolts through the mounting hole. Tighten the screws to secure the base flat on the mounting surface. Do not overtighten. 3.
PAGE 9
Installation Instructions continued from the previous page Connect Tubing: 1. Use a sharp cutter or knife to cut the end of tubing square. 2. Inspect the end (about 1") of the tubing to be sure there are no nicks, scratches or other rough spots. If needed cut the tubing again. 3. Push tubing through the collet and all the way into fitting. Full engagement is 3/4" length of tube into the fitting.
PAGE 10
Filter Cartridge Life Filter Cartridges Taste and Odor Cartridges: A taste and odor cartridge contains activated carbon, a black powder. When new, open the filtered water faucet and allow fine, carbon particles to purge from the cartridge. Close the faucet when you no longer see the “fines” (carbon particulates) in the filtered water, or approximately 10 minutes.It is recommended to replace the battery and filter cartridges every six months of use.
PAGE 11
Faucet Timer Faucet Electronics Inside the faucet base is a battery operated 6 month timer. An amber LED indicator is also located in the front of the faucet base. This LED will flash continuously after 6 months have passed. This indicates that it is time to replace the battery and filters. Battery Change To change the battery, complete the following steps. 1. Loosen the screw on the right side of the faucet base. 2. Press the battery housing upwards from faucet base until it releases from the base.
PAGE 12
Parts List Key No. 1 119-8600088 3 á 4 2 7292674 2 – 1 Part No. 1128-03-HD á 5 1128-03-HB ¢ 7168435 6 ¢ WHEEDF 11128-03-AC Description Faucet, with base & electronics Water Supply Fitting, 3/8” Q.C. Repl. Cabinet (incl. Key Nos. 3 & 4) Cabinet, Left Cabinet, Right Manifold Assembly (includes Key Nos. 3-5) Repl.