Installation Instruction

2
BUILT-IN MICROWAVE/OVEN COMBINATION SAFETY
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools Needed
■ Phillips screwdriver
■ Measuring tape
■ Drill (for wall cabinet installations)
■ 1” (2.5 cm) drill bit (for wall cabinet installations)
■ Level
■ Flat-blade screwdriver
Parts Needed
■ UL listed or CSA Approved conduit connector
■ UL listed wire connectors
■ Warming Drawer Deflector Kit (for ovens installed above a
warming drawer):
Color Size Type Warming Drawer
Deflector Kit
White 27” Combo W10510613
White 30” Combo W10510614
Black 27” Combo W10531009
Black 30” Combo W10531010
Stainless Steel 27” Combo W10536338
Stainless Steel 30” Combo W10536339
Black Stainless
Steel
27” Combo W10888988
Black Stainless
Steel
30” Combo W10727416
Bronze 30” Combo W11123007
To order, see the “Assistance or Service” section of the Use and
Care Guide.
■ Flush Installation Kit (for Single and Double installed at flush
installation):
Color Size Type Flush Installation
Kit
White 27” Combo W11173682
White 30” Combo W11173684
Black 27” Combo W11173686
Black 30” Combo W11173692
Stainless Steel 27” Combo W11173695
Stainless Steel 30” Combo W11123004
Black Stainless
Steel
27” Combo W11173701
Black Stainless
Steel
30” Combo W11173704
Bronze 30” Combo W11123006
To order, see the “Assistance or Service” section of the Use and
Care Guide.
Parts Supplied
■ Four #8–14 x 3/4” (19 mm) screws
■ Bottom vent
■ Two #8–18 x 3/8” (9.5 mm) screws — bottom vent
Check local codes. Check existing electrical supply. See the
“Electrical Requirements” section.
It is required that all electrical connections be made by a
licensed, qualified electrical installer.
You can be killed or seriously injured if you don't immediately
You
can be killed or seriously injured if you don't
follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING