Owner's Manual

7
� Electrical supply junction box should be located 3" (7.6 cm)
maximum below the support surface when the oven is installed
in a wall cabinet. A 1" (2.5 cm) minimum diameter hole should
have been drilled in the right rear or left rear corner of the
support surface to pass the appliance cable through to the
junction box.
NOTE: For undercounter installation, it is recommended that
the junction box be located in the adjacent right or left cabinet.
If you are installing the junction box on rear wall behind oven, it
is recommended that the junction box be recessed and located
in the upper center of the cabinet.
� Oven support surface must be solid, level and flush with bottom
of cabinet cutout.
� Floor must be able to support a single oven weight of 200 lbs
(91 kg) for 30" (76.2 cm) models.
� Floor must be able to support a double oven weight of 330 lbs
(150 kg) for 30" (76.2 cm) models.
IMPORTANT: To avoid damage to your cabinets, check with
your builder or cabinet supplier to make sure that the materials
used will not discolor, delaminate or sustain other damage.
This oven has been designed in accordance with the
requirements of UL and CSA International and complies with
the maximum allowable wood cabinet temperatures of
194°F (90°C).
Undercounter Installation (With Cooktop Installed
Above):
Ovens approved for this type of installation have an approval label
located on the top of the oven. Refer to Cutout Dimensions for
Ovens Installed Under Cooktop.
Cabinet Dimensions - Single Ovens, Standard
Installation
Single Oven Undercounter (Without Cooktop Installed Above)
27" (68.6 cm) models
A. 27" (68.6 cm) minimum
cabinet width
B. 1
1
/
2
" (3.8 cm) minimum top of
cutout to underside of
countertop
C. 5
1
/
4
" (13.3 cm) bottom of
cutout to floor
D. 25
1
/
2
" (64.8 cm) minimum
cutout width
E. 28" (71.2 cm) minimum cutout
height
30" (76.2 cm) models
A. 30" (76.2 cm) minimum
cabinet width
B. 1
1
/
2
" (3.8 cm) minimum top of
cutout to underside of
countertop
C. 5
1
/
4
" (13.3 cm) bottom of
cutout to floor
D. 28
1
/
2
" (72.4 cm) minimum
cutout width
E. 28" (71.2 cm) minimum cutout
height
Single Ovens Installed in Cabinet
27" (68.6 cm) models
A. 27" (68.6 cm) minimum
cabinet width
B. 1
1
/
4
" (3.2 cm) top of cutout to
bottom of upper cabinet door
C. 32" (81.3 cm) bottom of
cutout to floor
D. 25
1
/
2
" (64.8 cm) minimum
cutout width
E. 1
1
/
2
" (3.8 cm) minimum
bottom of cutout to top of
cabinet door
F. 28" (71.2 cm)* recommended
cutout height
G. 24" (60.7 cm) cutout depth
30" (76.2 cm) models
A. 30" (76.2 cm) minimum
cabinet width
B. 1
1
/
4
" (3.2 cm) top of cutout to
bottom of upper cabinet door
C. 32" (81.3 cm) bottom of
cutout to floor
D. 28
1
/
2
" (72.4 cm) minimum
cutout width
E. 1
1
/
2
" (3.8 cm) minimum
bottom of cutout to top of
cabinet door
F. 28" (71.2 cm)* recommended
cutout height
G. 24" (60.7 cm) cutout depth
*NOTE: The cutout height can be between 26
15
/
16
" and 29
7
/
16
"
(68.4 cm and 74.8 cm) for single ovens.
NOTE: Tall shield for installations greater than 28
11
/
16
" (72.9 cm).