Installation Guide

13
WARNING
Excessive Weight Hazard
Use two or more people to move and install oven.
Failure to do so can result in back or other injury.
1. Using two or more people, lift the lower oven by the side
handles located on the right and left side of the oven. Gently
insert into the cabinet cutout.
2. Place left bracket on top of the lower oven and against the
left cabinet side.
3. Place right bracket on top of the lower oven and against the
right cabinet side.
NOTE: For bracket installation, the maximum interior cabinet
width is 23
11
/
16
" (60.1 cm).
4. For standard installation, align the front ange of both left
and right brackets to the front cabinet, using a at surface.
For Flush installation align the front aesthetic panel to the
cabinet and place the bracket frontal ange against the rear
side of the aesthetic panel
5. Assure to x the two brackets in an horizontal position and
align one each other.
6. Once the bracket is aligned, screw the bracket to the side
wall with twelve of the 4 x 12 mm screws.
A
B
A. Left bracket
B. Right bracket
A
A. Front ange of the bracket of Double Oven
A
A. Front aesthetic panel