Dimension Guide

610 (24)
CAB WIDTH
35
(1 3/8)
575
(22 5/8)
17
(11/16)
80 (3 ⅛)
617 (24 1 1/4)
DOOR WIDTH
621 (24 7/16)
END CAP WIDTH
707
(27 13/16)
MAXIMUM
OVERALL
50
(1 15/16)
1246
(49 1/16)
90°
WALL
Allow at least 1" (2.54 cm) between back of
cabinet and the wall (consider the condenser
as back in case is present). If your refrigerator has
an ice maker, make sure you leave 1" (2.54 cm)
at the back for the water line connections.
LOCATION REQUIREMENTS
To ensure proper ventilation for your refrigerator, it is recommended to allow a 1/2" (1.27 cm)
space on each side. Allow 1½" (3.81 cm) of space between overhead cabinets and refrigerator
top. Allow at least 1" (2.54 cm) between back of cabinet and the wall (consider the condenser
as back in case is present). If your refrigerator has an ice maker, make sure you leave extra
space at the back for the water line connections.
If you are installing your refrigerator next to a fixed wall, leave 2 1/4 (5.7 cm) on the hinge side
to allow the door to swing open.
This space on the hinge side also allows for crisper removal when the door is fully swung
open.
NOTE: This refrigerator is intended for use in a location where the temperature ranges from a
minimum of 55°F (13°C) to a maximum of 110°F (43°C). The preferred room temperature range for
optimum performance, which reduces electricity usage and provides superior cooling, is between
60°F (15°C) and 90°F (32°C). It is recommended that you do not install the refrigerator near a heat
source, such as an oven or radiator.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
2
TOP Mount Refrigerator
Note: All the dimension are millimeters (inches in) i.e. 610 mm (24 in)