Owner's Manual
Table Of Contents
- REFRIGERATOR SAFETY
- Refrigerator Safety
- MAINTENANCE AND CARE
- Cleaning
- Changing the Light Bulbs
- Vacations
- Moving
- INSTALLATION INSTRUCTIONS
- Unpack the Refrigerator
- Location Requirements
- Electrical Requirements
- Water Supply Requirements
- Connect the Water Supply
- Install Air Filter
- REFRIGERATOR DOORS
- Door and Handle Instructions
- Remove Doors and Hinges
- Reverse Doors and Hinges (optional)
- Replace Doors and Hinges
- Final Steps
- Reversibility Kit Instructions
- Adjust the Doors
- REFRIGERATOR AND FREEZER FEATURES
- Refrigerator Shelves
- Freezer Shelf
- Door Rails or Trivets
- Can Racks and Bins (on some models)
- Deli or Meat Drawer
- Crisper
- Utility Compartment
- Ice Maker
- SÉCURITÉ DU RÉFRIGÉRATEUR
- Sécurité du réfrigérateur
- ENTRETIEN ET RÉPARATION
- Nettoyage
- Remplacement des ampoules d’éclairage
- Vacances
- Déménagement
- INSTRUCTIONS D’INSTALLATION
- Déballage du réfrigérateur
- Exigences d’emplacement
- Spécifications électriques
- Spécifications de l’alimentation en eau
- Raccordement à la canalisation d’eau
- Installation du filtre à air
- PORTES DU RÉFRIGÉRATEUR
- Instructions pour la porte et la poignée
- Démontage des portes et charnières
- Inversion du sens d’ouverture des portes et d’installation des charnières (facultatif)
- Réinstallation des portes et charnières
- Étapes finales
- Instructions pour l’ensemble d’inversion du sens d’ouverture
- Ajustement des portes
- CARACTÉRISTIQUES DU RÉFRIGÉRATEUR ET DU CONGÉLATEUR
- Tablettes du réfrigérateur
- Tablette de congélateur
- Tringles de la porte ou balconnets
- Cannettes et balconnets de porte (sur certains modèles)
- Tiroir à viande ou à charcuterie
- Bac à légumes
- Compartiment utilitaire
- Machine à glaçons
12
Freezer Door
1. Remove the freezer door handle. Using a 1/8" hex key, loosen
the setscrew located on the side of the handle. Pull the handle
straight out from the door. Keep all parts together.
A. Shoulder screw C. Flat-head handle screws
B. Setscrew
2. Remove the brand badge using the plastic tool (provided).
Replace it with the badge provided in the Reversibility Kit
located inside the crisper. For proper placement, see the
Brand Badge Placement template (the last page of this
manual).
NOTES:
� To avoid scratching the finish, do not use a sharp or
metallic object to pry the brand badge from the door.
� Rub a small amount of liquid dish soap over any adhesive
residue with your fingers. Rinse the door with warm water
and dry with a soft cloth.
3. Remove door stop. Move to opposite side of freezer door as
shown.
A. Door Handle Sealing Screws
4. Refer to image in Step 1. Reinstall freezer handle on opposite
side of the freezer door.
5. Tighten all screws. Set aside door until hinges and refrigerator
compartment door are in place.
Refrigerator Door
1. Remove the refrigerator door handle. Using a 1/8" hex key,
loosen the setscrew located on the side of the handle. Pull the
handle straight out from the door. Keep all parts together.
A. Flat-Head Handle Screw B. Set Screw
2. Remove door hinge hole plug from refrigerator door. Move to
opposite side hinge hole as shown below.
A. Door Hinge Hole Plug
3. Remove door handle hole plug and discard. Replace on
opposite side with the door handle hole plug provided in the
Reversibility Kit located in the crisper.
4. Remove door stop. Move to opposite side of refrigerator door
as shown below.
A. Door Stop Screw B. Door Stop
5. Refer to image in Step 1. Reinstall refrigerator handle on
opposite side of the refrigerator door.
6. Tighten all screws. Set aside refrigerator door until bottom
hinge is installed on refrigerator.