Dispensing Guide

1
FFrreenncchh DDoooorr BBoottttoomm MMoouunntt DDiissppeennssiinngg aanndd SSttoorraaggee GGuuiiddee
Water and Ice Dispenser Controls
A. Water dispenser paddle
TO DISPENSE WATER (STANDARD)
IMPORTANT: Dispense at least 1 qt (1 L) of water every week to
maintain a fresh supply.
1. Press a sturdy glass against the water dispenser lever.
NOTE: While dispensing water and for 3 seconds after
dispensing has stopped, the digital display will show how much
water has been dispensed.
2. Remove the glass to stop dispensing.
TO DISPENSE WATER (MEASURED FILL)
Measured Fill allows you to dispense a specified amount of water
with the touch of a few buttons.
NOTE: The amount of water you select will be dispensed. Be sure
that the container is empty and can hold the entire volume. If ice is
in the container, you may need to adjust your selection.
Household water pressure may affect the accuracy of the
Measured Fill feature. For optimum performance of your water
dispenser, you must first calibrate Measured Fill.
How to calibrate Measured Fill:
IMPORTANT: Flush the water system before calibrating Measured
Fill.
1. Place a sturdy measuring cup (1-cup [237 mL] size) on the
dispenser tray centered in front of the water dispenser paddle.
NOTE: Depending on your model, a measuring cup may be
provided.
2. Press and hold the Options and Lock buttons at the same time
for 3 seconds. The words “Back” and “1 Cup” will appear on the
display screen. Also, the Calibrate Measured Fill icon will
illuminate and remain lit while the Measured Fill feature is being
calibrated.
NOTE: You may press Ice Type “Back” at any time to exit
calibration mode. The Calibrate Measured Fill icon will
disappear.
3. Press and release the water dispenser paddle, as needed, to
dispense water to the 1 cup fill line.
NOTE: If overfilling or spilling occurs, discard the water and
press “Back” to restart the calibration process.
4. When 1 cup of water has been correctly dispensed into the
measuring cup, touch Measured Fill to confirm the calibration.
When Measured Fill calibration has been confirmed, the
Calibration icon will disappear and the display will return to the
home screen.
1. Press Measured Fill to turn the feature on. When the feature is
on, the Measured Fill screen appears on the display. Press Ice
Type to manually turn off the Measured Fill feature.
NOTE: The dispenser will automatically turn off Measured Fill
after 1 minute of inactivity. When Measured Fill is turned off,
any changes you have made will be lost and all defaults will be
restored.
2. You can dispense water by the ounce, cup, or liter. The default
unit is ounces. To switch to cups or liters, press the Light
button.
Default, minimum, and maximum volumes are listed below.
Units Default Minimum Maximum
Ounces 8 1 128
Cups 1 1/4 16
Liters 0.25 0.05 4.00
3. Press the Lock and Options buttons to adjust the volume as
desired. The Lock button increases the volume, and the
Options button lowers the volume.
NOTE: Most coffee cups (commonly 4 to 6 oz [118 to 177 mL]
per cup) are not the same size as a measuring cup (8 oz [237
mL]). You may need to adjust the volume to avoid
unintentionally overfilling coffee cups.
4. To dispense water, press a sturdy glass against the water
dispenser lever or place the glass below the water dispenser
and press the Measured Fill button.
NOTE: While dispensing water, the digital display will count
down how much water remains to be dispensed, according to
the volume you selected. The flow of water will automatically
stop once the desired volume has been dispensed.
5. To stop dispensing before the selected volume has been
dispensed, remove the glass from the dispenser lever or press
the Measured Fill button a second time.
NOTE: If you stop dispensing before the desired volume has
been dispensed, the digital display will continue to show how
much water remains to be dispensed. The display will turn off
after 1 minute of inactivity.
6. To select a new volume or start dispensing the same volume
again, you must first finish dispensing the selected volume, or
turn off the Measured Fill feature (either by waiting 1 minute so
it will automatically turn off or by pressing Ice Type to manually
turn it off) and then turn it back on.

Summary of content (8 pages)