Quick Reference Guide
3
Press
faucet button
MORE WATER WHEN YOU WANT IT
RINSING BEFORE RUNNING A WASH CYCLE
Water Faucet Operation
■ Press the faucet button once to turn on and press again to
turnoff.
■ Faucet will automatically shut off after 10 minutes or when max
water level is reached.
■ Water will automatically drain if water level becomes too high or
ifthe lid is left open for 10 minutes.
■ On Load & Go models when the faucet is on touch TEMP
button to select water temperature or touch LOAD & GO button
to manually dispense a dose of detergent.
LOADING RECOMMENDATION
For best performance, it is recommended to load items in loose
heaps evenly around the washplate and agitator.
IMPORTANT: You will not see a washer basket full of water as with
your past agitator-style washer. It is normal for some of the load to
be above the water line.
Auto Sensing & Deep Water Wash
■ The washer will adjust the water level to the optimal amount for a
High Efficiency wash of the detected load size.
■ Touch “DEEP WATER” to add more water to the wash load.
■ There are four levels of deep water “Auto”, “Medium”, “High”,
“Max Fill”.
■ Not all levels are available on all cycles.
■ The washer dampens and moves the load, the level of the items
will settle in the basket. This is normal, and does not indicate that
more items should be added.
Max Fill
High
Medium
Auto
■ Load & Go™ feature will default On for each cycle unless
disabled.
■ Touch LOAD & GO button to view detergent dispensing options.
■ Hold LOAD & GO button on the control panel to choose a
detergent concentration between 2X and 10X. Hold for
3 seconds.
■ Pull the drawer completely out for easy refilling.
1. Turn brush from body to open.
2. Add liquid laundry detergent.
3. Turn to close.
4. To dispense detergent from fabric brush push button.
USING THE DISPENSER
Fabric Brush
1
3
2
4