Specifications

Page 10 | 1-855-235-5271
WM&FD 021014
PREPARING AND INSTALLING THE
WALL MOUNT EVAPORATOR UNIT (FAN COIL UNIT)
• Drill
• 5/32” Drill Bit
• 1/4” Socket Drill Bit
• 1/4” Wrench
• Phillips Head Screwdriver
• Tape Measure
• Brazing Torch
• Drywall Saw
• Ladder
• Level
• Pliers
• Pencil
Required Tools:
1. Remove the knockouts for the drain line,
line set, and electrical on the bottom or rear
of the unit depending on your installation
preference.
2. Remove the insulation from the knockout
holes.
3. For ease of installation, remove the 9 screws
securing the top and remove the top.
Power
3/8” Suction
1/4” Liquid
Drain
DRAIN PAN