Use and Care Guide

8|P a g e
OPERATING YOUR AIR CONDITIONER
Before you begin, thoroughly familiarize yourself with the control panel, remote control and all of
the functions. Follow the symbol for the desired function. The unit can be controlled by the unit
control panel alone or with the remote control.
CONTROL PANEL
1. MODE
Controls the 4 function modes: COOL, AUTO, Fan only
& DRY.
6. UP & DOW N
Adj
usts set
temperature (1
O
C/ 2
O
F increments) or timer
hours (0 – 24 hours).
NOTE: This unit is capable of displaying set temperature
in Fahrenheit or in Celsius. To convert from one to the
other, press and hold the Up and Down buttons for 3
seconds.
2. TIMER
T
urns the timer function on and off. To cancel the timer,
press the Power button or set the timer to 0.0.
7. LED DISPLAY
In Cool mode: shows set temperature in
O
C or
O
F and
AUTO timer setting.
In DRY and FAN only modes: shows room temperature.
Error Codes:
E1, E2 & E4: Unplug unit and restart in 5 minutes.
P1: Bottom water tank is full; drain water from the unit
3. POW ER
T
urns the unit on and off.
4. SLEEP
T
urns the sleep function on and off.
5. FAN
Cont
rols the 4 fan speeds: HI, MED, LOW & AUTO. The
fan speed indicator lights illuminates to show the set fan
speed.
W hen the AUTO speed is selected, none of the
fan speed indicator illuminates.
9. SW ING
Turns on the auto swing function.