User manual

9
Operation and Controls
It is recommended that you install the wine cooler in a place where the ambient temperature is between
(68°F - 78°F). If the ambient temperature is above or below recommended temperatures, the performance
of the unit may be affected. For example, placing in extreme cold or hot conditions may cause interior
temperature to fluctuate thus the set temperature may not be achievable.
SETTING THE TEMPERATURE
The temperature range can be set between 54ºF and 66ºF. To set the desired temperature, press the “▼”
button to lower the temperature or “▲” button to raise the temperature on the control panel. The tempera-
ture display will flash for 5 seconds indicating that the desired temperature is set and will revert back to its
actual internal temperature.
NOTE: The temperature inside the wine cooler is dependent on the ambient temperature (room tempera-
ture).
INTERIOR LIGHT
You can turn on and off the interior light by pressing the “Light” button on the control panel.
LEVELING THE APPLIANCE
It is important for your appliance to be leveled in order to work properly. It can be raised or lowered by rotat-
ing each of the feet on the bottom of the machine. If you find that the surface is not level, rotate the feet until
the appliance becomes level .You may need to make several adjustments to level it. We recommend using a
carpenter’s level to check the machine.
Note: The WC-282TS has 3 large leveling legs and 1 small leveling leg under the door hinge.
1. Place a carpenter’s level on top of the product to see if
the appliance is level from front to back and side to
side.
2. Adjust the height of the feet as follows: Turn the level-
ing feet to the right to lower that side of the refrigera-
tor. Turn the leveling feet to the left to raise that side of
the refrigerator.
BOTTLE CAPACITY
The 28 bottle capacity listed for your wine cooler is an estimated maximum capacity base on a standard
750ml wine bottle. For other size bottles, the capacity will vary.
WINE SHELVES
This wine cooler is equipped with 6 scalloped stainless shelves. If you are having trouble fitting the stated
listed number of bottles of wine in the wine cooler, try flipping the wine racks over. To prevent damage to
the door gasket, make sure the door is all the way opened when pulling the shelves out.
 For easy access of the wine bottles, you must pull the shelves approximately ⅓ out of the railing.
 When removing the shelves out of the railing, make sure to remove all items first.
 To remove the shelves, pull the shelf forward through the rail carefully.