User guide

6
Operation
Accepting an incoming call
1. When a call comes in, a ringing tone will be heard in the hearing aid or headphones and the receiver
indicator R1 starts blinking blue.
2. Press the button R1 to accept the call.
3. Press the button R1 to end the call.
R1
R1
R1
2
1 3
Please note:
• Only make a single short push to accept or end a call. It may take a couple of seconds before a call is
completely connected or disconnected.
• The ringing tone of the mobile telephone call may be the same sound as heard from the mobile telephone
itself depending on the mobile telephone used.
• If T-DEX is turned off when a mobile telephone call comes in, that specific call cannot be answered or ended
using T-DEX.
Making a mobile telephone call
1. Turn on T-DEX by pressing the button R1 for up to five seconds.
2. Enter the dial number on the mobile telephone and pick up the handset.
3. The call is automatically transferred to T-DEX.
4. To end the call, press the button R1 or end the call on the mobile telephone.
Rejecting an incoming call
1. When a call comes in, a ringing tone will be heard in the hearing aid or headphones and the receiver
indicator R1 starts blinking blue.
2. Press receiver button R2- (volume down) for 2 seconds to reject the call.
R1
R2-
2
1