User manual

FX 250 / FX 500 User Manual
26
5.3.3 Primary Handset Operaons
Making a Voice Call
Before making a voice call, please make sure that:
-The Primary Handset is connected to the BDU ( status indicator should be on)
-The Primary Handset is NOT radio silent ( status indicator should be o)
-The BDU has successfully registered with the network and ready for CS domain
(voice) services ( status indicator should be on)
You can use the following two opons for making a call:
• Manual Dial:
1. Using the alphanumeric keypad, dial 00 <country code> <phone number>.
2. Press key.
• Using Contacts or Call Log list from the Primary Handset:
- Enter the Contacts list of the Primary Handset; scroll to the desired number
and press key, or
- Enter the Log list of the Primary Handset; scroll to the desired number and
press key.
Note:
For voice calls and SMS, you may also use ‘+’ by pressing and holding the key
instead of “00” at the beginning of dialled number string as an alternave (‘+’ <country
code> <phone number>).
To End a Call
1. Press .
Receiving a call
When there is an incoming call, the Primary Handset will,
• Ring.
• The calling party’s number will be displayed on the screen.
If the number is stored in the contacts, the corresponding name of contact will
be displayed.
To answer an incoming call, press the key.