User manual

FX 250 / FX 500 User Manual
36
 Adding/Eding proles
You can press the Le selecon or key from the opon list to add new or edit
exisng prole sengs.
• Prole name
Specify the name of the prole.
• Connecon type
Both Standard and Streaming connecon types are supported.
• APN
Specify informaon of the APN (Access Point Name). Further available sengs are:
APN: Specify the Access Point Name for the connecon. Default APN is according
to SIM card. Enter your own APN if you do not want to use the default APN from
the SIM card.
Username: Specify the user name for Stac IP conguraon. Default is blank for
Dynamic IP conguraon.
Password: Specify the password for Stac IP conguraon. Default is blank for
Dynamic IP conguraon.
You can press the Le selecon key for the following opons:
ο Edit
Edit the selected APN seng
ο Fetch from SIM
Fetch the APN from the SIM card. This opon is only available when APN is
highlighted.
• IP conguraon
Contain opons for Stac or Dynamic IP. Default is Dynamic IP conguraon.
• IP address
Specify the IP address for Stac IP conguraon. This eld is ignored for Dynamic
IP conguraon. Default is blank for Dynamic IP conguraon.
• Header comp.
Contain opons to enable or disable header compression. Default is Enabled.