User manual
FX 250 / FX 500 User Manual
38
Note:
You will be prompted to save the changed sengs before exing the sub
menu. Press Le selecon key or key to save the changes.
Icon in the prole list indicates that the prole is not acve and icon indicates that
the prole is currently acve in use.
Status
Allow you to check the status of the data connecon. You can also acvate / de-acve a
specic prole in the status display list.
Note:
You will not be able to enter this sub menu if the BDU has not been registered for PS data
service.
The status list shows you the current acve data connecon. Depending on whether there is
an acve connecon, you can press the Le selecon key for the following opons:
• Acvate primary
This opon is available when there is no acve data connecon. Select this to
choose from the prole list for acvaon.
• Deacvate
This opon allows you to de-acve an acve data connecon.
To acve a primary data connecon when there is no acve connecon:
1. From the data status list, select Opons using the Le selecon key.
2. Select Acvate primary using Le selecon key or key.
3. Select from a list of congured primary prole for acvaon. Press Le
selecon key or key to conrm.
4. You are prompted to conrm acvaon. Conrm acvaon by selecng Yes using
the Le selecon key or key.
Note:
It may take a while to acve a data connecon.