User manual

FX 250 / FX 500 User Manual
60
Satellite Selecon
The default Satellite Selecon is in Auto mode. In Auto mode, the UE will scan all the visible
satellites and track the satellite with the most opmum elevaon angle or the last used
satellite.
Note:
Changing the satellite selecon will terminate any exisng acve voice/fax call or data
connecons.
Follow these steps to change your satellite selecon:
1. Click on Setup icon
2. Click the Satellite Selecon to view the visible satellites.
The visible satellites will be displayed for your selecon.
It also displays the satellite informaon that your Antenna Unit’s is locked on to.
3. Click on your choice of visible satellites.
4. Click the Select buon to point the antenna to the selected satellite in
exclusive mode. The satellite selecon will be saved, and each me you power up
the UE, the satellite selecon choice will remain unl you make the next selecon
change. The UE will track the newly selected satellite even if the elevaon angle is
not opmum.
5. Click Refresh to refresh the Satellite list.