Brochure

10,5
9,5
6,0
10,5
9,5
6,0
10,5
9,5
6,0
13,5
11,5
7,5
13,5
11, 5
7,5
13,5
11, 5
7,5
306
Diagonal cutter, narrow, pointed shape.
Z 40 1 04 Diagonal cutter Professional ESD.
Standards: DIN ISO 9654.IEC 61340-5-1.
Head shape: Narrow, pointed head.
Design: Bevelled cutting edges, individually tested, also appropriate for thin, hard
wires. Maximum service life of cutting edge achieved through additional
inductive hardening to approx. 64 HRC.
With opening spring. Surface resistance 10
6
- 10
9
ohms.
Material: High alloy carbon steel C 60.
Application: For cutting different hardnesses of wires in places which are difficult to
access.
Order-No.
26808
115 4 ½ 1.0 0.6 0.3 60 5
27442
115 4 ½ 1.0 0.6 0.3 60 x 5
Z 40 4 04 Diagonal cutter Professional ESD.
Standards: DIN ISO 9654. IEC 61340-5-1.
Head shape: Extra narrow, short head for working in
particularly restricted spaces.
Design: Cutting edge almost without bevel for virtually flush cutting, individually
tested. Maximum service life of cutting edge achieved through additional
inductive hardening to approx. 64 HRC.
With opening spring. Surface resistance 10
6
- 10
9
ohms.
Material: High alloy carbon steel C 60.
Application: For virtually flush cutting copper wire in flat places which are difficult to
access.
Order-No.
26814
115 4 ½ 1.0 60 5
27443
115 4 ½ 1.0 60 x 5
Z 40 3 04 Diagonal cutter Professional ESD.
Standards: DIN ISO 9654. IEC 61340-5-1.
Head shape: Narrow, pointed head.
Design: Blade without facet, individually inspected, suited to thin, tough wire.
Maximum service life of cutting edge achieved through additional induc-
tive hardening to approx. 64 HRC.
With opening spring. Surface resistance 10
6
- 10
9
ohms.
Material: High alloy carbon steel C 60.
Application: For absolutely flush cutting of copper wire in places which are difficult to
access.
Order-No.
33521
115 4 ½ 1.0 60 5
Wiha Professional ESD.
Precise in every detail.
Diagonal cutter, broad, pointed shape.
Z 41 1 04 Diagonal cutter Professional ESD.
Standards: DIN ISO 9654. IEC 61340-5-1.
Head shape: Wide, pointed head.
Design: Bevelled cutting edges, also appropriate for hard wires.
Maximum service life of cutting edge achieved through additional induc-
tive hardening to approx. 64 HRC.
With opening spring. Surface resistance 10
6
- 10
9
ohms.
Material: High alloy carbon steel C 60.
Application: All round electronic diagonal cutter for cutting wires of different hardnes-
ses.
Order-No.
26816
115 4 ½ 1.4 1.0 0.4 60 5
27444
115 4 ½ 1.4 1.0 0.4 60 x 5
Z 41 3 04 Diagonal cutter Professional ESD.
Standards: DIN ISO 9654. IEC 61340-5-1.
Head shape: Wide, pointed head.
Design: Cutting edge without bevel for absolute flush cutting.
Maximum service life of cutting edge achieved through additional induc-
tive hardening to approx. 64 HRC.
With opening spring. Surface resistance 10
6
- 10
9
ohms.
Material: High alloy carbon steel C 60.
Application: For absolutely flush cutting of copper wire.
Order-No.
26821
115 4 ½ 1.0 60 5
27445
115 4 ½ 1.0 60 x 5
Z 41 4 04 Diagonal cutters Professional ESD with wire trapping spring.
Standards: DIN ISO 9654. IEC 61340-5-1.
Head shape: Wide, pointed head.
Design: With fixture for trapping ends of wires which have been cut off.
Cutting edge with full flush cutter function for virtually flush cutting.
Maximum service life of cutting edge achieved through additional induc-
tive hardening to approx. 64 HRC.
With opening spring. Surface resistance 10
6
- 10
9
ohms.
Material: High alloy carbon steel C 60.
Application: For virtually flush cutting copper wire, function for trapping cut off wire.
Order-No.
26822
115 4 ½ 1.2 60 5
27446
115 4 ½ 1.2 60 x 5