Brochure

10,5
9,5
6,0
10,0
14,0
29
o
7,5
12,0
13,5
11, 5
7,5
20,0
6,3
10,0
5,8
40
o
13,5
11, 5
7,5
www.wiha.com
Safety note:
When working with cutting pliers –
beware of wire ends flying away.
Please wear safety glasses.
307
Diagonal cutter, semi-circular shape.
Z 43 1 04 Diagonal cutter Professional ESD.
Standards: DIN ISO 9654. IEC 61340-5-1.
Head shape: Narrow, semi-circular head.
Design: Cutting edge with full flush cutter function for virtually flush cutting.
Maximum service life of cutting edge achieved through additional induc-
tive hardening to approx. 64 HRC.
With opening spring. Surface resistance 10
6
- 10
9
ohms.
Material: High alloy carbon steel C 60.
Application: For virtually flush cutting of copper wire in places which are difficult to
access.
Order-No.
26826
115 4 ½ 1.2 60 5
27447
115 4 ½ 1.2 60 x 5
Z 44 1 04 Diagonal cutter Professional ESD.
Standards: DIN ISO 9654. IEC 61340-5-1.
Head shape: Wide, semi-circular head.
Design: Bevelled cutting edges, also appropriate for thin, hard wires.
Maximum service life of cutting edge achieved through additional induc-
tive hardening to approx. 64 HRC.
With opening spring. Surface resistance 10
6
- 10
9
ohms.
Material: High alloy carbon steel C 60.
Application: All round electronic diagonal cutter for cutting wires of different hardnes-
ses.
Order-No.
26831
115 4 ½ 1.4 1.0 0.4 60
5
27448
115 4 ½ 1.4 1.0 0.4 60 x 5
Z 44 3 04 Diagonal cutter Professional ESD.
Standards: DIN ISO 9654. IEC 61340-5-1.
Head shape: Wide, semi-circular head.
Design: Cutting edge with full flush cutter function for virtually flush cutting.
Maximum service life of cutting edge achieved through additional induc-
tive hardening to approx. 64 HRC.
With opening spring. Surface resistance 10
6
- 10
9
ohms.
Material: High alloy carbon steel C 60.
Application: For virtually flush cutting of soft wires.
Order-No.
26832
115 4 ½ 1.2 60 5
27449
115 4 ½ 1.2 60 x 5
Oblique end cutting nippers.
Z 46 1 04 Oblique end cutting nippers Professional ESD.
Standards: DIN ISO 9654. IEC 61340-5-1.
Head shape: Wide head, angled at 29°.
Design: Cutting edge with full flush cutter function for virtually flush cutting.
Maximum service life of cutting edge achieved through additional induc-
tive hardening to approx. 64 HRC.
With opening spring. Surface resistance 10
6
- 10
9
ohms.
Material: High alloy carbon steel C 60.
Application: For virtually flush cutting of soft wires.
Can be used horizontally and virtically.
Order-No.
26835
115 4 ½ 1.2 78 5
27450
115 4 ½ 1.2 78 x 5
Z 46 4 04 Oblique end cutting nippers Professional ESD.
Standards: DIN ISO 9654. IEC 61340-5-1.
Head shape: Extra narrow head.
Cutting edges angled at 40°.
Design: Cutting edge with full flush cutter function for virtually flush cutting.
Maximum service life of cutting edge achieved through additional induc-
tive hardening to approx. 64 HRC.
With opening spring. Surface resistance 10
6
- 10
9
ohms.
Material: High alloy carbon steel C 60.
Application: For virtually flush cutting thin, soft wires in places which are particularly
difficult to access.
Order-No.
26838
110 4 ¼ 0.6 42 5
27451
110 4 ¼ 0.6 42 x 5