Specifications

Eye shield bolts

Eye shield

lock knobs

Washers

Eye shields

Grinder

BEFORE YOU START

UNPACKING YOUR BENCH

GRINDER

WARNING:

• To avoid injury do not plug the power cord into power source

during unpacking and assembly.

• To avoid injury, if any part is missing or damaged, do not plug

in the bench grinder until the missing or damaged part is

replaced, and assembly is complete.

• To avoid fire and toxic reaction, never use gasoline, naphtha,

acetone, lacquer, thinner, or similar highly volatile solvents to

clean the bench grinder.

UNPACKING AND CHECKING CONTENTS

(Figure 2)

Separate all parts from the packing material. Check

each one with the illustration and the list of loose parts

to make certain all items are accounted for, before

discarding any packing material.

Item Quantity

Grinder 1

Eye shield assembly, bolt,

knob, 3 washers 2 sets

Note: To make assembly easier, lay out all parts on a clean

work surface before assembly.

Use only accessories recommended for this grinder.

Using other accessories may be dangerous.

Figure 2