Use and Care Manual

ManualsBrandsWilton ManualsClamps & Vises4.5 in. Jaw Width Tradesman 1745 Vise

Stock no. 28805, Tradesman Vise (model 1745)

Stock no. 28806, Tradesman Vise (model 1755)

Stock no. 28807, Tradesman Vise (model 1765)

Replacement parts

Stock no. 28805 28806 28807

Model no. 1745 1755 1765

ITEM DESCRIPTION QTY. PART NO.

Stationary Jaw casting # reference 111803 111813 111823

Spindle Assembly

1 2900000 2900150 2900330

1a Spindle 1 2900001 2900151 2900331

1b Tommy Bar, with rubber rings

1 2900002 2900152 2900332

Spindle Retainer with 3 screws and #3

1 2904000 2904000 2904010

Thrust Washer

1 Not available separately

Set of Jaw Inserts with 4 screws

1 set 2908060 2908070 2908080

Set of Pipe Jaw Inserts with 2 screws

1 set 2904200 2904200 2904200

Casing Nut with 2 pins

1 2900220A 2900240A 2900340A

Lock Nut Assemblies (set of 2)

1 set 2905190 2905200 2905200

Locking Pads (set of 2)

1 9040010 9040020 9040020

Outer Ring only

1 1011990 1011980 1011980

Swivel Base Assembly (includes #8,9,10)

1 2900230 2905790 2905790

To order parts or reach our service department, call 1-800-274-6848 Monday through Friday, 8:00 a.m. to 5:00 p.m. CST. Having the Model

Number and Serial Number of your tool available when you call will allow us to serve you quickly and accurately. Some parts are shown for

reference only, and may not be available individually.

Specifications

Stock no. 28805 28806 28807

Model no. 1745 1755 1765

Jaw width 4-1/2 in. (114 mm) 5-1/2 in. (140 mm) 6-1/2 in. (165 mm)

Open capacity, maximum

3-1/2 in. (90.5 mm) 5 in. (127.5 mm) 6 in. (151.5 mm)

Throat depth 3-1/4 in. (82.6 mm) 3-3/4 in. (95.3 mm) 4 in. (101.6 mm)

Pipe jaw capacity 1/4 – 2-1/2 in. (6.4 – 63.5 mm) 1/4 – 3 in. (6.4 – 76.2 mm) 1/4 – 3-1/2 in. (6.4 – 89 mm)

Shipping weight 42 lbs. (19 kg) 51.5 lbs. (23 kg) 71 lbs. (32 kg)

based on lead screw engagement with half of nut thread length

WILTON

427 New Sanford Road

LaVergne, Tennessee 37086 Part No. M-28805

Ph.: 800-274-6848 Edition 3 11/2018

Note: See reverse side for important safety instructions.

Summary of content (2 pages)

PAGE 1
Stock no. 28805, Tradesman Vise (model 1745) Stock no. 28806, Tradesman Vise (model 1755) Stock no.
PAGE 2
IMPORTANT SAFETY INSTRUCTIONS  Misuse of vise can cause serious injury to eyes, hands, limbs, etc.  To ensure safety, vise must be set up and used properly.  Before setting up and using, read, understand, and follow all instructions as outlined below. When setting up vise:  Use proper size bolts, nuts, lock and flat washers, in all base mounting Holes. Never weld base of vise to any metal object.  Only hand-tighten swivel base lock down nuts at the sides of the vise.