Use and Care Manual

MECHANICS PRO Series Vise

Replacement parts

Stock no. 28810 28811 28812 28813 28814

Model no.

845M 855M 865M 880M 8100M

ITEM DESCRIPTION QTY. PART NO.

1 Spindle and Handle Assembly 1 28810-001 28811-001 28812-001 28813-001 28814-001

2 Roll Pin 1

3 Needle Bearing 1 BB-AXK1730 BB-AXK2035 BB-AXK2035 BB-AXK2542 BB-AXK2542

4 Spindle Washer 1 89125-07 DT125B-09 DT125B-09 GB95-85 GB95-85

5 Guide Key 1 744M-08 1745-08 1765-10 1780-09 750M-06

6 Elastic Cylinder Pin 4x14 mm 2

7 Moving Body 1

8/9 Jaw Inserts (set of 2) with Screws 1 28810-008 28811-008 28812-008 28813-008 28814-008

10 Pipe Jaws (set of 2) with Screws 1 28810-010 28811-010 28812-010 28813-010 28814-010

11 Stationary Body 1

12 Spindle Nut 1 744M-04 745M-04 745M-04 748M-04 750M-05

13 C-Retaining Ring, Int. 1 F007076 F006092 F006092 F006093 F006093

14 End Cap 1 744M-05 745M-05 745M-05 748M-05 748M-05

15 Plate Rivet 4

16 Wilton Logo Plate 2

17 Base Plate 1 744M-06 745M-06 745M-06 748M-06 748M-06

17~20 Base Plate Assembly, Complete 1 28810-017 28811-017 28812-017 28813-017 28814-017

19 Locking Pad 1 744M-07 745M-07 745M-07 748M-07 748M-07

18/20 Locking Nut Assembly (one set) 2 28810-018 28811-018 28812-018 28813-018 28814-018

To order parts or reach our service department, call 1-800-274-6848 Monday through Friday, 8:00 a.m. to 5:00 p.m. CST. Having the Model

Number and Serial Number of your tool available when you call will allow us to serve you quickly and accurately. Some parts are shown for

reference only, and may not be available individually.

WILTON

427 New Sanford Road

LaVergne, Tennessee 37086 Part No. M-28810

Ph.: 800-274-6848 Edition 1 06/2018

PAGE 1
MECHANICS PRO Series Vise Replacement parts ITEM 1 2 3 4 5 6 7 8/9 10 11 12 13 14 15 16 17 17~20 19 18/20 Stock no. 28810 845M Model no. DESCRIPTION QTY. Spindle and Handle Assembly 1 28810-001 Roll Pin 1 Needle Bearing 1 BB-AXK1730 Spindle Washer 1 89125-07 Guide Key 1 744M-08 Elastic Cylinder Pin 4x14 mm 2 Moving Body 1 Jaw Inserts (set of 2) with Screws 1 28810-008 Pipe Jaws (set of 2) with Screws 1 28810-010 Stationary Body 1 Spindle Nut 1 744M-04 C-Retaining Ring, Int.
PAGE 2
IMPORTANT SAFETY INSTRUCTIONS • • • • Misuse of vise can cause serious injury to eyes, hands, limbs, etc. To ensure safety, vise must be set up and used properly. Before setting up and using, read, understand, and follow all instructions as outlined below. WARNING: Cancer and Reproductive Harm - http://www.p65warnings.ca.gov/. When setting up vise: • Use proper size bolts, nuts, lock and flat washers, in all base mounting Holes. Never weld base of vise to any metal object.