Use and Care Manual

Table Of Contents

.OPERATION OF CONTROL PANEL…。。。。。。。。。。….。 …

1. BEFORE COOKING

The display will flash 3 times when plugged in power supply, and

then the LED screen will display the clock, which is in standby

mode.

2. CLOCK

In the standby mode, turn the knob to the "Clock" position, and

then hold the knob button for 3 seconds to enter the clock setting

state. The display screen displays the clock, in which the "hour"

position flashes. At this time, turn the lower knob to adjust the

hour, and turn it reversely to 12-11…1 hour, cycle. The forward

rotation is 1-2…12 hours, cycle. After setting the hour, press the

knob button below again to enter the minute setting. Turn the