User`s guide

Power cord selection
4 P4-EPC /B-E1, B-E2 – Operating Manual 1750100230 C
Power Cord Selection
IMPORTANT:
Power cord are not supplied with the equipment and consumers have to use
certified power cord, for example,
1) CCC for China
2) UL, cUL and CSA for North America
3) Certified power cord approved by home governing body for Continental
Europe, UK and Australia
The power cord for this unit has to select according to the country of
destination. It must be used to prevent electric shock. Use the following
guidelines if it is necessary to replace the original cord set.
The female receptacle of the cord set must meet CEE-22 requirements (see
above Figure).
For the United States and Canada
Use a UL listed and CSA labeled cord set consisting of a three-conductor cord
with a maximum length of 15 feet.
For units, which stand on a desk or table, type SVT or SJT cord sets shall be
used. For units, which stand on floor, only SJT type cord sets shall be used.
The cord set must be selected according to the current rating for your unit.
Please consult Table A for the selection criteria for power cords used in the
United States and Canada.