User`s guide

Functions & Indicators on the P4-EPC

01750100230 C P4-EPC /B-E1, B-E2 – Operating Manual 13

FUNCTIONS & INDICATORS ON THE P4-EPC

1 – ON/OFF Button

In an ATX based system, the new soft touch power button replaces the main

power switch that turns your system on and off. From an OFF state, you can

switch the system ON by simply pressing the power button. From an ON

state, pressing and holding the power button for four (4) seconds can turn

OFF the system. The functions of the power button can also be altered in the

Power Management section of the CMOS setup.

2 – RESET Switch

Insert a small, metal rod (an unwound paperclip for example) into this hole to

perform System Reset

3 – POWER-ON Indicator

The indicator lights up green when the system unit is switched on.

4 – HARD-DISK Indicator

The indicator lights up when the Hard-Disk drive of the system unit is

accessed.

5 – FLOPPY-DISK Indicator

The indicator lights up when the Floppy-Disk drive of the system unit is

accessed.

6 – CD-ROM Indicator

The indicator lights up when the CD-ROM drive of the system unit is

accessed.