User`s guide
Important notes
2 P4-EPC /B-E1, B-E2 – Operating Manual 1750100230 C
Important notes
The P4-EPC system is a computer for manufacturer’s usage.
It is conforming to the current safety standards for data processing equipment.
If this device is taken from a cold environment into the operating room, moisture
condensation may form. The device must be absolutely dry before being put into
service; an acclimatization period of at least two hours must therefore be
observed,
This device is equipped with a safety-tested power cable and may be connected
only to a prescribed grounded-contact power socket.
When setting up the device, ensure that the power socket on the device and the
grounded-contact power socket are easily accessible.
To disconnect the device from the supply voltage completely, switch off the device
and disconnect the power plug.
Ensure that no foreign objects (e.g. office clips) find their way into the device, as
this may lead to electric shocks or short-circuits.
In order to ensure that the device is well ventilated and to prevent over heating, do
not obstruct the ventilation slots on your device.
Never plug in or unplug data communication lines during thunderstorms.
Protect devices from vibrations, dust, moisture and heat.
Always dispose of used parts in an environmentally safe manner.
In emergencies (e.g. damaged housing or damaged power cable, penetration by
liquids or foreign bodies), the device must be switched off immediately, the power
plug disconnected and the Customer Service of Wincor Nixdorf (WN) or your
dealer must be notified.
Your P4-EPC system is the result of modern technical innovation. So please see
for according structural and technical surroundings to guarantee a faultless and
efficient work of your system.
The device may only be repaired by authorized qualified personnel.
Unauthorized opening of the device and inexpertly carried-out repairs may not only
seriously jeopardize the safety of the user, but also cancel all warranty and liability
agreements.
W
ARNINGS
: