Installation manual

14
RD-9901 Remote Control Wall Plate Installation
To install the optional RD-9901, proceed as follows:
1. Connect the 25' telephone cord to the REMOTE CONTROL PANEL plug
on rear of positioner. See Figure 16.
NOTE: The RD-9901 will fit into a standard electrical outlet box.
2. Connect other end of telephone cord to plug on side of RD-9901. See
Figure 16.
3. Secure RD-9901 with screws provided.
NOTE: Refer to Operation Manual on how to operate the RD-9901.
REMOTE
CONTROL
PANEL
Positioner Rear Panel
25' Telephone Cord
RD-9901 Remote Control
Wall Plate
Figure 16
Rev. 6/98