Installation manual

Model RD-9900

PINNACLE

POSITIONER

by WINEGARD

SELECT B

SELECT A

Figure 11

Figure 10

System has found a satellite and is fine tuning the signal

Fine Tuning

Elevation

Model RD-9900

PINNACLE

POSITIONER

by WINEGARD

SELECT B

SELECT A

7. Press SELECT A if correct satellite was found

Press SELECT B if correct satellite was not found

Correct Satellite

Continue Search

9. Verify that system has found correct satellite (you will see a picture). Since

DBS services use a digital signal and the satellites are only separated by 9

the system can find the wrong satellite. Press [SELECT A] if correct satellite

was found, Figure 11. You are now ready to watch satellite TV! If the wrong

satellite was found, press [SELECT B] to continue the search.

If no satellite is found the message Satellite Not Found, Press Any Button,

will be displayed by the positioner. Press any button to return to the menu

shown in Figure 1, page 4.

NOTE: If after two (2) tries you still get "Satellite Not Found" check that:

1. The antenna has a clear view of the satellite(s), no trees,

buildings, etc. blocking the view. The satellite signal will not pass

through solid objects.

2. Your receiver is turned ON.

3. The positioner is connected to the receiver correctly, refer to

Installation Manual.

If after checking the above, you still do not find a satellite refer to the

Troubleshooting Manual.

Rev. 2/97