Installation manual

Model RD-9900

PINNACLE

POSITIONER

by WINEGARD

SELECT B

SELECT A

MOVE TO LAST SATELLITE

NOTE: All commands will be shown in bold with brackets, example

[SELECT A].

Move to Last Satellite: This function allows you to move the antenna to the last

position that the system found a satellite. This feature is very useful. It allows

you to put the antenna into the travel position and if the RV/coach was not

moved return to watching TV without performing the search function. To move

antenna to the last satellite position, proceed as follows:

1. Press [UP/DOWN] arrow until Move to Last Sat is displayed on positioner.

See Figure 25.

1. Press UP/DOWN arrow

buttons to get Move to Last

Sat on screen

2. Press [SELECT A or B] Move to Last Sat, see Figure 25. The positioner

will display the message Moving to Satellite while antenna is moving to last

saved satellite position. When antenna stops moving, the system will acquire

satellite signal (if you have not moved the RV/coach) and you will be watching

TV!

Figure 25

2. Press SELECT A or B as

appropriate

Move to Last Sat

Manual Move