Installation manual

Model RD-9900

PINNACLE

POSITIONER

by WINEGARD

SELECT B

SELECT A

EDIT MENU

1. Press UP/DOWN arrow

buttons to get Manual Move

on screen

Figure 29

NOTE: All commands will be shown in bold with brackets, example

[SELECT A].

This Edit Menu allows you edit/perform the following functions: Select and edit

the search satellite, return system to factory defaults, access the test functions

menu, and display the system type and software version. To access the Edit

Menu, proceed as follows:

1. Press [UP/DOWN] arrow until Edit is displayed on positioner. See Figure

29.

2. Press [SELECT A or B] Edit, see Figure 29.

2. Press SELECT A or B as

appropriate

Edit

Search DSS

Model RD-9900

PINNACLE

POSITIONER

by WINEGARD

SELECT B

SELECT A

Figure 30

3. Press UP button until

3000 is displayed

4. Press SELECT A to enter

code

Enter Code: 3000

3. Press [UP] arrow button until positioner display shows 3000. See

Figure 30.

4. Press [SELECT A] Enter Code: 3000 to access Edit Menu. See Figure

NOTE: To exit Edit Menu, press [DOWN] arrow key, then [SELECT B] Quit

to exit Edit Menu.